This 10mm Mini click kit has been designed for users cleaning;Solid fuel flues, gas flues, oil flues, Biomass flues, biomass inducting tubes and ducting.
The rods and head will fit through access as small as 25mm and has a capacity to sweep a flue of 150mm (6 inch).
This kit is a base to add to should you wish, but comes as standard with 10 meters of rods (33 feet), drill drivers (with and without button) so you can clean flues from the top or bottom, spare strands and a brush head.
These rods will tackle some of the trickier bends you can find on appliances, the head and ferrules are brass, and therefore highly resistant to acidic environments.
These rods will support 15 meters of flue comfortably, and further you can add an 8mm mini click rod to the front as a leader rod, for very awkward flues.
Due to the rods being only 10mm in thickness they can be cut so it is advisable to use a rod guide (included in the kit) wherever possible. Also be very aware of sharp edges (such as rain caps) that can score or cut the rod. Always spin the rods and keep movement in a forward or backward direction. Should you stop this motion and rotate the rods in a static position, there is the possibility you could cut the rod, due to a sharp edge.
|Rodtech Click 1000 x10mm Rod
|Rodtech Click 450mm Twin Bullet
|Rodtech Click Mini Click Drill Adapter (with button)
|Rodtech Click Mini Click Drill (without button)
|Chimney Rod Guide
|300MM Replacement Strands